Sansevieria cylindrical - the easiest indoor plant to care for
In recent years, the interiors of coffee houses, restaurants and offices with a focus on modern minimalism have literally flooded the bushes of a unique plant - cylindrical sansevieria, more like living sculptures. This shade-tolerant miracle in all respects can overshadow even its counterparts, bypassing in endurance both the "mother-in-law's tongue" and other competitors. The cylindrical leaves rounded in cross section, creating a bizarre turf, bring strict beauty and orderliness to any corner. And revive even those places where it would seem difficult to survive any houseplant.
- Sansevieria is cylindrical - the most hardy of all sansevier
- Growing conditions for sansevieria cylindrical
- Care for sansevieria cylindrical at home
- Diseases, pests and growing problems
- Reproduction of sansevieria cylindrical
Sansevieria is cylindrical - the most hardy of all sansevier
Sansevieria is cylindrical, or Cylinder (Sansevieria cylindrica) Is the most easily recognizable plant not only in the Sansevier family, but also among all the fashionable modern indoor plants that can only be found on store shelves. The smooth, rounded, elongated cones or knitting needles of its leaves are difficult to confuse with other indoor crops.
The decorative merits of this type of sansevierium coincide with all the requirements for plants for modern interiors - clean, strict lines and geometric or architectural motifs, minimalism with maximum expressiveness. It is almost impossible to find more simplicity and trendy graphics.
But even the beauty of the plant is more than overshadowed by purely practical advantages. Being one of the most hardy and unpretentious of all indoor crops, the cylindrical sansevieria is suitable for almost any florist, even a very rare house.
And, perhaps, the combination of these two factors - extreme endurance with beauty - led to the fact that the plant, which only a few years ago was interesting only to selected fans of the mother-in-law's tongue, today has become not only one of the most popular, but also the most expensive indoor plants. Small bushes of sansevieria cylindrical cost as much as a small palm tree or large adult varieties of another mod - anthurium.
For sansevieria cylindrical, as for all other sansevieriae, a rather specific rhizome is characteristic: developing with rhizomes, it actually does not form classical roots and grows in an unusual group of mutated leaves. It grows in breadth in the same way as its relative, Sansevieria, is three-lane - releasing sideways shortened underground shoots that carry daughter sockets.
Cylindrical, rounded in section, smooth, with a waxy coating, the leaves of sansevieria seem to many to be simply pointed at the ends by plump green sticks. The ability to store water allows the plant to acquire unique drought tolerance. The stiffness of the leaves makes the plant very stable.
At first glance, the leathery leaves of the sansevieria cylindrical seem to be so perfectly rounded: a peculiar groove runs longitudinally at each leaf, suggesting their true nature, and a sharp, drying tip only emphasizes its shape. On the dark green, grayish and light-waxed surface of the leaves, silvery transverse stripes can be seen, which appear brighter with age.
Formed today, the formed sansevieria is cylindrical - a plant with intertwined shoots forming amazingly beautiful green sculptures. Plant varieties offer a choice between more compact options, with leaf heights up to 50 cm, and bushes with leaves that can grow up to 1 m or more. Varieties differ in the shade of color, and in the intensity of the stripes, and in the presence or absence of a border.
Flowering of sansevieria cylindrical is considered a rarity, because the plant for this must be kept in strictly controlled conditions. Half-meter peduncles are crowned with spike-shaped paniculate inflorescences with small, creamy-red flowers. The flowering efficiency is not so pronounced as to sacrifice for it the opportunity to get a truly universal interior decoration.
Growing conditions for sansevieria cylindrical
Sansevieria is cylindrical - one of the unique plants that are not afraid of competition and take root in almost any residential premises. She is very good in solo parts, especially when choosing containers that clearly show the style of interior design.
But there are no equal sansevieria cylindrical and in complex, intricate compositions of modern terrariums and florariums, where its even leaves provide the opportunity to introduce completely new accents in compositions with cacti and succulents. The lack of aggressiveness and compactness of this plant in the florariums is revealed from a completely new perspective.
Lighting and placement
The main advantage of cylindrical sansevieria is its absolute versatility. This is one of the rare indoor plants that you can put where you want - without regard to the location of the windows. The shade tolerance of the plant allows the sansevieria cylindrical to develop well even in the depths of the rooms. If you want to achieve flowering from a cylindrical beauty, or variegated, brightly colored varieties are chosen, then you need to choose lighter areas.
When placing a sansevieria cylindrical, it is worth considering that this plant loves to be next to a person. It is most often placed on tables for a reason: introducing orderliness, structurality into the interior, this plant harmonizes the general atmosphere in places of communication. Sansevieria looks great as a decoration for countertops of tea, newspaper, coffee tables, on chests of drawers, shelving. It is better to place it not outdoor, but at least on small supports.
Temperature and ventilation
A cool wintering is often recommended for sansevieriae, but for a cylindrical sansevieria it is even not needed. Plants feel great at any temperature in living rooms, from 16 degrees Celsius - all year round. Lowering the temperature during dormancy is necessary only to stimulate flowering, but it does not always give a result. Therefore, the plant can be safely placed in cool or warm rooms at your discretion.
The cylindrical sansevieria is not afraid of temperature changes and drafts, it is equally attractive both in coolness and in elevated temperatures. The only thing it is worth protecting from is a sharp hypothermia. A cylinder is very rarely taken out to fresh air, because this plant enjoys a reputation for purely interior decoration, and the period when the air temperature at night exceeds 16 degrees is too short in regions with severe winters.
Care for sansevieria cylindrical at home
The easiest indoor plant to care for - such a status and advertising for a cylinder is not an exaggeration. A plant that can be content with only one watering per month, requiring almost no attention and easily forgiving mistakes is an ideal choice for those who cannot afford to take care of capricious flowerpots. This is one of the best plants for exploring modern cultures and new ways of growing and presenting them.
Watering and humidity
Like any other indoor plant, sansevieria cylindrical will prefer regular watering. They are not carried out often, allowing the soil to dry in the upper layer, maintaining light moisture. The plant is not afraid of drought, but it does not tolerate dampness, overflow and waterlogging.
Due to the fact that the plant can do without irrigation for a long time at all, cylindrical sansevieria was included in the list of plants that are most suitable for creating dry florariums. In the right substrate, she is content with rare watering, up to 1 time per month for complex compositions with succulents.
Sansevieria is cylindrical insensitive to dry air, so there is no need to take any spraying procedures or other measures. Too high humidity for this plant should be avoided. But the regular cleaning of greens from dust in the grooming program should be included, because any dust particles are clearly visible on large, perfectly smooth leaves.
Fertilizing and fertilizer composition
The cylindrical sansevieria can be grown without top dressing, because the plant is not demanding on the nutritional value of the soil, it does not grow so intensively and, given a fairly regular transplant, can be content with the nutrients already in the soil.
To accelerate the growth and maintenance of plants in the absence of transplants, rare supplements are included in the care program - with a frequency of 1 time per month in a standard dose or 1 time in 2 weeks, but halving the concentration of fertilizers.
For sansevieria cylindrical, special fertilizers are preferred for succulents and cacti. Universal fertilizers for indoor plants are used in dosages that are halved compared to standard ones.
Trimming and forming sansevieria cylindrical
The cylinder does not need to be formed. Damaged leaves are cut completely, at the base, carefully, with disinfected tools.
To form a fashionable interlaced form of sansevieria cylindrical, you need to choose the right variety - with dark green, relatively soft leaves. Only tightly growing leaves and only young plants can be twisted, gently pulling and shifting the leaves to obtain a pigtail and always fixing the “structure” at the top with soft twine or decorative twine.
Transplant, containers and substrate
It is possible to transplant this type of sansevieria at any time of the year, but only within the framework of a period of active growth and when kept warm. The cylindrical sansevieria does not have such powerful rhizomes, does not threaten neighbors or pots, but nevertheless, the pace and direction of its growth is better taken into account when growing in complex compositions of florariums.
Sansevieria cylindrical can grow in the lightest and friable soil. It is better to choose substrates with a pH from 5.5 to 6.0, without peat content in the composition. She is content with a minimum amount of soil, grows well in florariums. This plant can be grown in a classic substrate or in inert soil, hydroponically and in rocky decorative soil.
If the plant is grown in classic containers and a substrate, a high layer of drainage must be laid at the bottom of the containers for sansevieria cylindrical. This culture also loves upper drainage, or decorative mulching of the soil.
Diseases, pests and growing problems
Even compared to Sansevieria, a three-lane cylindrical can pleasantly surprise with stability. The only thing that threatens the plant is soil pests, including nematodes and rot, spreading in moist soil. If there is evidence of soil contamination, an emergency transplant is necessary. With root lesions, you can try to combat the correction of care and drying of the soil. But more often than not, emergency transplantation and removal of damaged parts is indispensable.
Reproduction of sansevieria cylindrical
You can get new bushes of sansevieria cylindrical by dividing large, overgrown bushes into several parts, and rooting individual “cylinders”. Large sheets are cut completely and cut into fragments from 5 to 10 cm long, rooting in sand or light soil. Slices are dried before planting, buried in a substrate of 2 cm.